Reactor
Description
Review
Description
WST-CKSG Harmonic Filter Reactor Three Phase Series Reactor Produced
Products Description
Dry core series reactor is suitable for ac 50Hz, rated working voltage 6-35kV power system,
dry core series reactor is an important auxiliary equipment of reactive power compensation
device in power system. In capacitive reactive compensation capacitor, often by harmonic
current, closing the influence of inrush current and operating over-voltage, which reduces the
damage of capacitance and power factor, therefore need in front-end reactor with series
capacitor, to suppress and absorb harmonic,protection of capacitor, to avoid a few impulse
voltage current harmonic voltage current impact, improve power quality, improve system
power factor Extend the service life of the capacitor.
Features
1. The product is divided into single phase, iron core dry type;
2. The iron core is made of fine cold rolled silicon steel sheet, which is punched and cut
by high speed punch, with small burrs,uniform rules, neat and beautiful lamination,
ensuring the performance of low temperature rise and low noise of reactor operation;
3. The coil is made of excellent insulated wire, wound by special machine, with the advantages
of good flatness and beautiful appearance;
4. The reactor in the process of assembly, all is through anticorrosive processing, key clip
with non-magnetic material, and the preliminary drying and vacuum leaching paint a thermal
drying curing this process, the reactor coil and iron core firm become an organic whole,
greatly reduces the run-time temperature rise and noise, effectively improve the quality factor
of the reactor and reduce the effect of the harmonic.
Working environment
1. The altitude shall not exceed 2000m;
2. Operating ambient temperature -25 ℃ to +45 ℃, relative temperature does not exceed 90% :
3. There is no harmful gas and inflammable and explosive articles around;
4. The surrounding environment should have good ventilation conditions. If installed in
the cabinet, ventilation equipment should be added.
Specifications
1. Can be used for capacitor voltage: 0.4kV 0.45kV 0.48kV 0.525kV 0.66kV 0.69kV;
2. Reactance rate: 1%, 6%, 7%, 12%, 14%;
3. Voltage grade: 3kV/min
4. Insulation grade: B, F, H,
5. noise: ≤65dB,
6. overload capacity: ≤1.35 times of continuous work
Model Explanation
Dimension
Technical Parameters
Packaging & Shipping
Review
Review
Send your message to us
